Продукти за amsoil 75w90 gl4 (6)

In 2015 the product name was changed. The old product name was Castrol Special Paste AU LN 598. Molub-Alloy Paste AU LN 598 White assembly paste Description Castrol Molub-Alloy Paste AU LN 598 (previous product name Castrol Special Paste AU LN 598) is ideal for all clean assembly work as well as as a base or thin film lubrication suitable. It specifically prevents fretting corrosion . The fitting parts can be easily removed even after years. Application Castrol Molub-Alloy Paste AU LN 598 can be used as a universally applicable assembly paste, for fitting parts in environments at risk of vibration, in mechanical systems with frictional vibrations, on hydraulic cylinders and open lubrication points as well as on sliding points in vehicle and transmission construction. Product number:1127 Container size:1 Product group:Industry

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication. Product number:1676120 Container size:1 Product group:Industry

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290 Container size:1 Product number:1509000

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01 Container size:1 Product number:1509015

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".